10
MegaCode® Receiver
Owner Installation Instructions
Coding Transmitters
Any button of the transmitter can be assigned to
any output on the MegaCode® receiver. To code a
transmitter button:
Navigating to “Code Transmitter” menu
1. Press NEXT to navigate to the Menu 1
(Fig. 4)
.
2. Press SET to enter code set procedure.
Storing transmitter code
1. Receiver will prompt to press one of the transmitter’s
buttons.
2. Press the transmitter button you wish to operate the
receiver (e.g. button 1)
(Fig. 5)
.
3. Press the same transmitter button again as prompted
by display
(Fig. 6)
.
Selecting function of the button
The receiver will now show the transmitter’s record, with
a cursor on the fi eld for the button being coded
(Fig. 7)
.
Use UP/DOWN to select the function for the button.
Available functions are:
M_# (Mimic)
P_# (Pulse)
PR# (Pulse/Reset)
T_# (Toggle)
S_# (Set)
R_# (Reset)
VAC (Vacation)
−−− (OFF)
Where # is the output Number 1,2,3,4
Press SET to save the settings
(Fig. 8)
or EXIT to abort
without saving.
Editing the store location
This feature is only available when coding the fi rst
button of a new transmitter.
1. Press NEXT or PREV to move cursor over Store No.
2. Press UP or DOWN to select new Store No
(Fig. 9)
.
3. Press SET to Confi rm or NEXT/PREV to move to next
fi eld.
This is useful when managing transmitters using
a scheme which ties the store location to the
transmitter’s owner.
Returning to main screen
The “Code Transmitter” menu will now be shown.
Press EXIT to return to the main screen and test the
transmitter.
5
fi g
MENU 1
Code Transmitter
PR E S S
6
fi g
7
fi g
8
fi g
2 I
D
[ No Name ]
M_1 --- --- ---
PRESS
2 I
D
[ No Name ]
M_
∆
--- --- ---
PRESS
Press Tx'er
Again!
PRESS
4
fi g
Press Tx'er
Button! LIST—›
PRESS
∆
I
D
[ No Name ]
M_1 --- --- ---
PRESS
9
fi g
