Owner Installation Instructions
MegaCode® Receiver
19
Menu 8 Diagnostic Tools
The controller provides several diagnostic tools from
within the Diagnostics Menu 8. This section details the
function of each tool and its use.
Navigating to Diagnostics Menu
1. Press PREV to navigate Menu 8
(Fig. 27)
.
2. Press SET to display the menu of available functions.
3. Press PREV or NEXT to cycle through the diagnostic
tool.
4. Press SET to select.
Menu 8.1 Test inputs
This tool is used to view the state of the control inputs.
When selected, a screen is displayed (
Fig. 28
) which
indicates the state of disable and trigger inputs. If the
number of the input is shown then that input is active.
For normal operation all inputs should be inactive
when idle. When fi nished press EXIT. The example in
Fig. 28
shows the status shown when Trigger 4 input
is active.
Menu 8.2 Test tx’ers
This tool is used to test receiver/transmitter
functionality. When selected, a screen is displayed
which prompts for a transmitter button to be pressed
(Fig. 29)
and whether ID or serial numbers are to be
displayed.
The opener will then beep each time a transmission
is received. If the transmitter button is stored in the
controller memory and has a function assigned to
it, a second screen will be displayed that shows the
transmitter details along with the button pressed
(Fig. 30)
. The example shows the case when transmitter
number 3 is activated by button 1. Note ID is selected
for display.
MENU 8
Diagnostics
PRESS
29
fi g
DISABLE: ....
TRIGGER: ...4
28
fi g
PRESS TX’ER!
<—/—> Shows ID/SN
27
fi g
Menu 7.3 Settings
This menu is used to adjust the Time Clock according to the daylight saving period.
Menu 7.3.1 Run Programs
This parameter allows the User to halt or run the timer programs.
Menu 7.3.2 Disable 4 Input
This input can be used as a daylight saving time adjuster. When activated, it will add the amount of time
selected in Menu 7.3.4 to the Time Clock.
Menu 7.3 .3 Disable 4 Input Contact
Disable four (4) input is confi gured for N/O operation. This parameter allows its operation to be changed to N/C
Menu 7.3 .4 Daylight Saving Time Adjust
The amount of time to add to the time clock at start of daylight saving period is selected here. The options are:
0, 30, 90, 120 minutes
3 I
D
AB SMITH
›ON OFF OFF OFF
PRESS
30
fi g
