INSTRUCTIONS CABRI-20P
Page 6
SWING GATE OPENER
1.3.3 Photocells
The pair of Photocells has to be installed on the wall and connected to the control
panel. The function of the photocells is to detect the obstacles found on the optical
axis between the transmitter (TX) and the receiver (RX).
Figure 5
1.3.4 Radio Transmitter
Radio transmitter is used for the remote control of the gate movement. To use the
transmitter, press and hold the button for 1 second. There are two buttons on the
transmitter and (A) button is “open-stop-close mode” and (B) button is “pedestrian
mode”.
1.3.5 Flashing Light
Flashing light is controlled by control box and blinks when the gate is moving.
The flashing light stops blinking when the gates finish opening or closing
Figure 7
