INSTRUCTIONS CABRI-20P
Page 12
SWING GATE OPENER
.
9.
Refer to Figure 20, the distance between front plate of the motor and rear plate is
798mm (CABRI-20P), the difference in height is 15.5mm (CABRI-20P).
10. Clamp and fix the motor front plate on the door temporarily
.
Figure 20
Figure 21
11. Lift up the motor and insert the screws into the front plate.
12
.
Lift the motor overhead and push the gate to the end until the screw holes of the
motor end matches the holes on the rear plate. Fasten the motor to the rear plate
with the bolt as shown in Figure22.
