INSTRUCTIONS CABRI-20P
Page 17
SWING GATE OPENER
Figure 2.3.5(7)
Change the spring and screw in different place
2
). Weld the back plate of the electric latch to the surface on the master gate.
See
Figure 2.3.5(8).
Please avoid melting the wires by the heat of the fixed plate
Figure 2.3.5(8)
For the gate opened inward
Figure 2.3.5(9)
For the gate opened outward
3). The gap between the bottom of electric latch and the stopper should be less than 7mm.
Figure 2.3.5(10).
4). Connect the wires of the electric latch to the terminal LAT (+) and LAT (-) on the PCB.
Figure 2.3.5(10)
For the gate opened inward.
Figure 2.3.5(11)
For the gate opened outward
