INSTRUCTIONS CABRI-20P
Page 18
SWING GATE OPENER
AUTOGLIDE CABRI-20P
3) Control Box
Control Box Installation
1. Decide the installation position of control box first, it is suggested to be installed
near the gate and should be protected from possible damage. Be aware of the
motor cable length before deciding the installation position.
2. Remove the cover by unscrewing the four screws on the cover. Figure 1(1).
3. Use a screwdriver to puncture the holes beneath the bottom of the control box.
Figure 1(2).
4. Secure it on the wall. Figure 1(3).
Figure 1(1) Figure 1(2) Figure 1(3)
