Autel MaxiPRO MP808S Скачать руководство пользователя | Manualshive

Страница: 2 / 89

background image

ii

Safety Information

For your own safety and the safety of others, and to prevent damage to the device and
vehicles upon which it is used, it is important that the safety instructions presented
throughout this manual be read and understood by all persons operating or coming into
contact with the device.

There are various procedures, techniques, tools, and parts for servicing vehicles, as well
as  in  the  skill  of  the  person  doing  the  work.  Because  of  the  vast  number  of  test
applications  and  variations  in the  products  that can be  tested  with  this  equipment,  we
cannot  possibly  anticipate  or  provide  advice  or  safety  messages  to  cover  every
circumstance. It is the automotive technician

’s responsibility to be knowledgeable of the

system being tested. It is crucial to use proper service methods and test procedures. It
is essential to perform tests in an appropriate and acceptable manner that does not
endanger your safety, the safety of others in the work area, the device being used, or the
vehicle being tested.

Before using the device, always refer to and follow the safety messages and applicable
test procedures provided by the manufacturer of the vehicle or equipment being tested.
Use the device only as described in this manual. Read, understand, and follow all safety
messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment damage.
All safety messages are introduced by a signal word indicating the hazard level.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury to the operator or bystanders.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator or bystanders.

Safety Instructions

The safety messages herein cover situations Autel is aware of. Autel cannot know,
evaluate or advise you as to all of the possible hazards. You must be certain that any
condition or service procedure encountered does not jeopardize your personal safety.

«
1
2
3
4
...
»

Содержание MaxiPRO MP808S


























































































Отзывы:

Нет отзывов

Похожие инструкции для MaxiPRO MP808S

Бренд: Gadhouse Страницы: 18

Бренд: Pantech Страницы: 90

Бренд: GAOMON Страницы: 11

Бренд: Gigabyte Страницы: 7

Бренд: Gold Note Страницы: 2

Бренд: LENCO Страницы: 78

Бренд: LENCO Страницы: 81

Бренд: Innovative Technology Страницы: 43

Бренд: IEI Technology Страницы: 34

Бренд: Chinavision Страницы: 7

Бренд: Haier Страницы: 18

Бренд: Haier Страницы: 31

Бренд: Haier Страницы: 51

Бренд: Haier Страницы: 27

Бренд: Haier Страницы: 68

Бренд: Kuzma Страницы: 10

Бренд: Kuzma Страницы: 13

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды