Autel Robotics X-Star Скачать руководство пользователя

Страница: 67 / 71

Appendix

egulatory

Compliance and Flight Restricted Area

Compliance and Advisory

FCC Compliance

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference thay

may cause undesired operation.

FCC Radiation Exposure Statement

This device abides by FCC radiation exposure limits releasing for an uncontrolled

environment. The minimum distance between the radiator and the user is

designed to be 20cm when the aircraft and its accessories are in function. It is

also forbidden to co-ordinate any other transmitter or antenna with this transmitter

in use.
Autel Robotics announces that the X-Star and X-Star Premium are in compliance

with the essential requirements and other relevant provisions of Directive 1995/5/

EC.

IC RSS Warning

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference, including

interference thay may cause undesired operation of the device.

IC Radiation Exposure Statement

This equipment complies with IC RF radiation exposure limits set forth for an

uncontrollable environment. This transmitter must not be co-located or operating

in conjunction with any other antennas or transmitter. This equipment should be

installed and operated with at least 20cm between the radiator and your body.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Flight Restricted Area Illustration

The X-Star and X-Star Premium system automatically recognizes the Flight

Restricted Area, in which flights are limited by default. This feature guarantees

Содержание X-Star








































































Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды

Autel Robotics X-Star, Руководство пользователя

Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды