24
2.
Hold the aircraft horizontally
by its arms and turn around
until the 4 LEDs on the
aircraft change into solid
green light, which will switch
to a flashing pattern later,
ready for the next step.
3.
Hold the aircraft vertically by
its arms with the nose facing
downwards and turn around
until the 4 LEDs on the aircraft
turn solid green, indicating that
your calibration is successful.
NOTE
• When the mobile app displays instructions or alerts, please perform
the required task in time to ensure your operation can be carried out
successfully.
• You can also start the calibration
process with the remote controller
by pressing (
) and (
)
simultaneously for 2 seconds. Then
continue to perform Steps 2 and 3 to
complete the procedure.
WARNING
• If the calibration is unsuccessful, the 4 LEDs on the aircraft will illuminate
solid yellow light. In this case, repeat the above steps to try again.
•
If severe drifting occurs during flight or the aircraft seems unstable for
any reason, please land immediately.
Installing the Propellers
WARNING
Do not power up the aircraft while installing or removing the propellers.
