Autel Robotics X-Star Скачать руководство пользователя

Страница: 69 / 71

Technical Specifications

Aircraft Specifications

Hover Precision

Horizontal: ±2.5 m; Vertical: ±1 m;

Max Yaw Rate

150°/s

Max Inclination Angle

GPS Mode: 20°; ATTI Mode: 25°

Max Ascent/Descent Speed

Ascent: 6 m/s; Descent: 3 m/s

Max Horizontal Speed

15 m/s

Diagonal Wheelbase

352 mm

Propeller Size

9.4”x5.5”

Video Link Frequency

X-Star: 2.412 GHz~2.462 GHz

X-Star Premium: 902 MHz~928 MHz

Receiver Frequency

5.745 GHz~5.799 GHz

Flight Modes

GPS, ATTI, IOC

Operating Environment Temperature

-10°C~45°C (14°F~113°F)

Storage Temperature

-20°C~80°C (-4°F~176°F)

Weight

(Battery & Propellers included)

1.42 kg

Aircraft Battery Specifications

Battery Type

Rechargeable Li-Po battery

Capacity

4900 mAh

Battery Voltage

14.8 V

Charging Environment Temperature

10°C~45°C (50°F~113°F)

pilots’ safe and legal operations of the product. The flight restricted areas are

divided into 2 protection categories.

Category I:

Major airports and flight areas where manned aircrafts operate at

low altitudes

• Take-off Restricted Zones

(No-Fly Zones)

These areas are set within 2.4km around the central point of specified airports.

• Altitude Restricted Zones

In these areas, the aircraft is only allowed to fly within limited altitudes. From

8km to 2.4km around the airport’s central point, the flight altitude decreases

progressively from 120m to 10.5m.

• Warning Zones

Once the aircraft enters a region within 8.1 km from the central point of the

airport, the app will prompt a warning message.

NOTE

If the aircraft enters any

Altitude Restricted Zones

, its maximum

allowable altitude will be reduced accordingly. If the aircraft enters any

Take-off Restricted Zones

, it will land automatically. You should pay

special attention to the warning messages displayed on your app.

Category II

: Sensitive areas and institutes such as military sites and border lines

between countries

• Take-off Restricted Zones

(No-Fly Zones)

These areas are set within 1km around the center of the specified sites where

take-off and flight are prohibited.

• Warning Zone

Once the aircraft enters the region within 2km from the center of the site, the

app will prompt a warning message.

Содержание X-Star








































































Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды

Autel Robotics X-Star, Руководство пользователя

Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды