Autel Robotics X-Star Скачать руководство пользователя страница 3

Страница: 3 / 71

WARNING

If any part of the aircraft (including motor, battery, gimbal, compass,

propellers, LED lights, binding buttons, etc.) or the remote controller fails

to function properly or has visible/invisible damages, DO NOT FLY THE

AIRCRAFT.

Battery Usage

The aircraft is powered by a Lithium-Polymer battery. LiPo/Li-Ion batteries can be

extremely hazardous and special attention is required during usage.

Read and follow carefully all safety messages and instructions presented to

avoid personal injury or property damage.

WARNING

The Lithium-Polymer battery is factory replaceable only; incorrect

replacement or tampering with the battery pack may cause an explosion.

Battery Use

• Use only the battery and battery charger provided by Autel Robotics. An

unqualified battery or charger may present a risk of fire, explosion, leakage,

or other hazards. Autel Robotics takes no responsibility for any damage

caused by non-Autel-Robotics batteries or charging devices.

• Always turn off the aircraft before installing or removing the battery.
• Remove the battery before assembly or when not in use.
•

Keep the battery away from water or any kind of liquid. If the battery gets in

touch with liquid, it may lead to an explosion while used or charged.

•

Do not expose the battery to fire, explosions, or other hazards.

• Do not disassemble, open, crush, bend, deform, puncture, or shred the

battery.

• Do not modify, remanufacture, or attempt to insert foreign objects into the

battery.

• Do not place heavy objects on the battery or charger.
• Stop using or charging the battery immediately whenever the battery starts

to swell, smoke or leak.

• Use the battery in temperatures between -10°C and 45°C. Extremely high

temperatures may cause a fire or explosion, extremely low temperatures

may lead to permanent battery damage. Before using a low-temperature

battery (between -10°C and 15°C) for flight, you need to fully charge it in

required temperatures, or insert it into an aircraft and make the aircraft hover

at the altitude of 1m to warm the battery up to 15°C or higher. The battery

temperature can be checked in the app.

Содержание X-Star








































































Результаты поиска

Содержание X-Star

Отзывы:

Бренды по названию

Популярные бренды

Autel Robotics X-Star, Руководство пользователя

Результаты поиска

Содержание X-Star

Отзывы:

Бренды по названию

Популярные бренды