Autel Robotics X-Star Скачать руководство пользователя

Страница: 5 / 71

with your skin or eyes, immediately wash the affected area with fresh running

water and see a doctor.

Reminders

•

Flying with an experienced pilot for the first flight is strongly recommended.

• Keep small or electrical parts out of the reach of children.
• Keep away from heat sources or humid and hostile environments.
•

Check the weather before flying, including air temperature and wind speed.

•

Make a thorough preflight check before each flight ( 26)

• Use only authorized accessories approved or provided by Autel Robotics.
• Do not attempt to disassemble, modify or reconstruct any part of the devices.

Autel Robotics will not be responsible for damages resulting from any

artificial reason.

• Do not use this product for illegal purposes.

Services and Support

www.autelrobotics.com

(844)-898-0290 (U.S.A.)

[email protected]

Or contact your local retail agent for technical assistance.

Содержание X-Star








































































Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды

Autel Robotics X-Star, Руководство пользователя

Результаты поиска

Содержание X-Star

Отзывы:

Похожие инструкции для X-Star

Бренды по названию

Популярные бренды