34
TIPS
• Always keep the monocular camera lens clean for a clear view.
• Do not use other 40KHz ultrasonic devices nearby when the
Starpoint
TM
Positioning System
is activated.
Landing and Motor Shut-down
The aircraft can be landed manually, automatically, or passively.
IMPORTANT
The aircraft must be landed gently on a flat surface to avoid damage.
z
Manual Landing
You can manually land the aircraft whenever and wherever you want by
maneuvering the command sticks on the remote controller.
¾
To land the aircraft manually
1.
Maneuver the aircraft to the desired position for landing.
2.
Release the command sticks when the aircraft reaches the target
position to let it hover.
3.
Push the
Descent
stick steadily and gently to land the aircraft.
¾
To shut down the motors
When the aircraft has properly landed, use one of the methods below to
shut down the motors:
Descent Stick:
Both Command Sticks:
Push to the end and hold for 2s
Hold toe-in for 2s
WARNING
The toe-in action will always shut down the motors even if the
aircraft is in midair. Please be extra cautious and use this feature
only in an emergency, e.g., when the aircraft gets out of control.
