35
z
Automatic Landing
You can use the
(
) button on the remote controller to land the aircraft
automatically from its current hover position with one single click.
¾
To land the aircraft automatically with the (
) button:
1.
Maneuver the aircraft to the desired position for landing.
2.
Release the command sticks when the aircraft reaches the target
position to let it hover.
3.
Press and hold the (
) button for 2 seconds until you hear a beep
sound.
4.
The aircraft will descend to land and shut off its motors automatically.
During descent, you will also have control of the pitch, roll and yaw
adjustments.
TIPS
During the automatic descent process, you can regain control by
pushing the
Ascent
stick to at least 90% level and maintaining for 2
seconds. (
31)
NOTE
• Automatic landing is also available in ATTI mode but you should
control the attitude of the aircraft manually.
• It is recommended that you land
the aircraft immediately when Low
Battery Warning (25% or lower)
is shown, i.e., the rear LEDs on
the aircraft flash red light, and the
(
) button on the remote controller
lights up in solid yellow light.
z
Passive landing
When Failsafe is triggered by any of the following conditions, the aircraft will
be forced to land onsite automatically.
• Low Battery Warning
is activated in non-GPS environment.
• Critical Low Battery Warning
is activated.
Using the Starlink
TM
App
The
X-Star/X-Star Premium
application,
Starlink
TM
, is a full-featured program
