51
Slide the scroll bar left or right to adjust the speed of the
Gimbal
Pitch
Dial
on the remote controller.
2.
RC Calibration
This function includes the calibration of the
Left Command Stick
,
Right
Command Stick
and
Gimbal Pitch Dial
. You will only need to calibrate
your remote controller when using it for the first time or after your remote
controller has been replaced.
The horizontal bar on the upper part of the screen represents the Pitch
Control Dial, and the two crossed bars on the sides represent the left and
right command sticks.
¾
To calibrate the remote controller
I.
Release the two command sticks and the Gimbal Pitch Dial to their
central position and tap
Start
.
II.
Push both command sticks and turn the Gimbal Pitch Dial to their
complete range of motion. The progress bars will be in response to
your calibration. Below is an example for illustration.
III.
After each bar has been highlighted 100%, tap
Finish
and your
remote controller calibration is completed.
