AUMA SA3-SA100, Руководство пользователя

Страница: 6 / 48

6
1.4 Name Plate
Each actuator will have a nameplate associated with it which contains several important
details. Please locate where the plate is present in your actuator. The information
provided in the nameplates is delineated below. These are required to ensure our support
after supply. There are several variations of nameplates available. Please match your
actuator nameplate with the appropriate one below to obtain the required information. You
are requested to furnish the below details of the name plate while ordering spare
parts/after sales support.
The Works Number mentioned in this name plate gives other details besides giving the
EPAC Version. The actuator type gives the maximum torque, RPM of the actuator,
weather proof/explosion proof and on-off/regulating duty.
1.5 Transport, storage and packaging
Transport Transport to place of installation in sturdy packing. If mounted together with actuator,
attach ropes or hooks for the purpose of lifting by hoist only to the gearbox and not to the
actuator and use eye bolt as per table 1.
√ Transport to the place of installation (till last destination).
√ Avoid packages from exposing to open atmosphere during transit.
√ Protect against rains.
Storage √ Store in well-ventilated, dry room.
√ Protect against floor dampness by storage on a shelf or on a wooden pallet.
√ Cover to protect against dust and dirt. Apply suitable corrosion protection agent to
bare surfaces.
√ In case gearboxes are to be stored for a long period (more than 6 months). Protect
bare surfaces, in particular the output drive parts and mounting surface, with long-
term corrosion protection agent.
√ Check for corrosion approximately every 6 months. If first signs of corrosion show,
apply new corrosion protection.
Type of enclosure is mentioned on the name plates.
Packaging √ Our products are protected by special packaging for the transport ex-works.
√ The packaging consists of environmentally friendly materials which can be easily
separated and recycled.
√ For the disposal of the packaging material, we recommend approved disposal
agency.
√ We use the following packaging materials: Wooden material boards (OSB) /
cardboard / paper, PE sheet.
Weather proof actuators with 3.XMP-SIL &
Data logging