AUMA SA3-SA100, Руководство пользователя

Страница: 36 / 48

36
8. Start actuator in OPEN direction and switch off by manually tripping limit switch
WOL (fig. 12).
9. For position seated closing: Start actuator in CLOSED direction and switch off by
manually tripping limit switch WSR (fig. 14).
10. If actuator does not stop, check connection of terminals and the control wiring.
11. Determine over-run of actuator in both directions by visual inspection (amount of
additional rotation of spindle or valve movement after actuator is switched off ).
12. Engage manual drive and operate actuator to fully closed position (fig. 15), while
observing the switch cam for limit switch WSR.
For position seating: When the switch has tripped (fig. 16) continue turning
handwheel to the final position and check whether the remaining travel corresponds
to the over-run. If not, reset to suit. See point 14.
13. Operate actuator manually to OPEN-position (fig. 17). Check in the same way as
described above for position seating, see point 12 (fig. 18).
14. Resetting limit-switching:
− Operate valve away from end-position to account for over-run or to the desired
switch tripping point.
− Push thrust bolt I inwards and turn (fig. 19). The bolt remains in this position.
− For CLOSED position turn spindle marked (Z), (for OPEN position spindle
marked , O) slowly as indicated by arrow (fig. 19). Distinct "clicks" can be felt
and heard. Continue turning the spindle until the cam operates the switch. At
this stage, the spindle should not "click" any more and should not be turned
any further.
Weather proof actuators with 3.XMP-SIL &
Data logging