AUMA SA3-SA100, Руководство пользователя

Страница: 14 / 48

14
Information regarding the running indication of the actuator (status) and faults are
indicated by the LEDs present on the left side of the LCD screen which is shown in the
Fig.
LED indication One can configure the four LEDS on the display module to represent different conditions.
The default LED settings are as below:
COLOR INDICATION MODE
GREEN
If LED is blinking then actuator is running in OPEN direction.
If LED is continuously ON then actuator is fully OPENED.
If LED is OFF – then actuator is in Mid-Travel.
AMBER
If LED is blinking then actuator is running in CLOSE direction.
If LED is continuously ON then actuator is fully CLOSED.
If LED is OFF – then actuator is in Mid-Travel.
RED
Torque open trip indication
RED
Torque close trip indication
RED
If LED is continuously ON -- Fault Condition
If LED is OFF – No fault Condition
BLUE
Default: OFF
If LED ON: Paired and Connected with AUMA India Utility
Software/ Whenever BT is connected
Weather proof actuators with 3.XMP-SIL &
Data logging