74
© AUDIOTEL Engineering S.p.A.
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
5.1.15 Smart Answer
Dial
#*#*86<SMART ANSWER><TONE OVER TE>
<SMART ANSWER>
Single numeric digit parameter which allows to establish a call
originated from a GSM phone only when the user connected to C
EL
L
INE
®
(via LINE or TE plug)
unhooks. Valid parameter = single numeric digit from 0 (smart answer disabled) and 1
(enabled). Default value= 0.
<TONE OVER TE>
Single numeric digit parameter which enables sending of a 1050Hz
tone when C
EL
L
INE
®
terminates the incoming GSM call (it is the way to warn the user that
the call has been established). Valid parameter = single numeric digit from 0 (tone disabled)
and 1 (tone enabled). Default value = 0.
5.1.16 Programming the LINE number
Dial
#*#*87<NUM. LINE>
<NUM. LINE>
8 digits parameter where is stored the extension number of the
telephone set connected to the LINE plug of C
EL
L
INE
®
. Valid parameter = 8 digits (from 0 to
9). Default value= none. To erase the stored number insert 0000.
5.1.17 Programming the numer of “Follow Me” rings from GSM
Dial
#*#*88<NUM. RING>
<NUM. RING>
2 digits parameter which allows to set the number of rings for the
telephone set connected to the LINE plug of C
EL
L
INE
®
: if this value is exceeded, the incoming
call is rerouted to the Follow Me number (this is valid for GSM incoming calls). Valid
parameter = 2 numeric digits (from 00 to 15). Default value = 00 (disabled).
5.1.18 Programming the number of “Follow Me” rings from TE
Dial
#*#*89<NUM. RING>
<NUM. RING>
2 digits parameter which allows to set the number of rings for the
telephone set connected to the LINE plug of C
EL
L
INE
®
: if this value is exceeded, the incoming
call is rerouted to the Follow Me number (this is valid for TE incoming calls). Valid parameter
= 2 numeric digits from (00 to 15). Default value = 00 (disabled).
5.1.19 SMS sending with C
EL
L
INE
®
firmware release
Dial
#*#*8*<TELEPHONE_NUM>
<TELEPHONE_NUM>
18 digits parameters where is stored the phone number where to
send the message containing the C
EL
L
INE
®
firmware version. Valid parameter = 18 digits
(from 0 to 9). Default value= none.
5.1.20 Voice call priority setting
Dial
#*#*8#<PRIORITY>
<PRIORITY>
single numeric digit (0 or 1) specifying to C
EL
L
INE
®
if disable or
enable the incoming/outcoming voice call priority when the DTR signal is high or in a GPRS
connection.
DX
DX
DX
DX
AS
AX DX
RS
AS
AX DX
RS
ENGLISH