66
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
© AUDIOTEL Engineering S.p.A.
4.3 HOW TO USE BOTH LINE PLUG AND TERMINAL EQUIPMENT (T.E.) PLUG
4.3.1 C
EL
L
INE
®
is connected as a PBX extension
If the telephone terminal is connected to C
EL
L
INE
®
by means of the LINE plug and C
EL
L
INE
®
is
connected by means of the T.E. to the PBX through a PBX extension circuit (e.g. extension
150), calls can be routed over either the PSTN or GSM network.
To originate a call over the GSM network it is necessary to define a code (see par. 5.1.10);
to originate the call over the PSTN network or another PBX extension it is necessary to
define a different code (see par. 5.1.11).
• Originated voice call routed over the GSM network
Lift the handset and wait for the dialling tone, then type the code (see par. 5.1.9) immediately
followed by the desired subscriber’s number. Between two different digits no more than 5
seconds are allowed (factory default timeout) or exceed the timeout programmed (see par.
5.1.2). In case of exceeding the timeout, C
EL
L
INE
®
will send the typed digits.
• Originated voice call routed over the PSTN network
Lift the handset and wait for the dialling tone, then type the code (see par. 5.1.10)
immediately followed by the desired subscriber’s number or PBX extension.
Between two different digits no more than 5 seconds are allowed (factory default timeout)
or exceed the timeout programmed (see par. 5.1.2). In case of exceeding the timeout,
C
EL
L
INE
®
will send the typed digits.
• Voice calls from remote users
For this option there are two different ways to call C
EL
L
INE
®
, based on how it has been
programmed.
DX
Extension 150
GSM
network
PSTN
network
Other C.O. lines
PBX
ENGLISH