59
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
© AUDIOTEL Engineering S.p.A.
3.6 WALL FIXING
In its rear side C
EL
L
INE
®
features 2 holes, properly shaped
(wheelbase = 40mm) to fasten onto a wall, by using the
screw anchors. Before the definitive fastening it is
recommended to test some potential locations by moving
the C
EL
L
INE
®
in order to choose a place where the GSM
field is enough (see par. 5.1.1).
During the initial start up, C
EL
L
INE
®
takes a few moments to trigger the GSM network; after
that it is ready to operate.
Different way how to use C
EL
L
INE
®
family products will be considered in the following.
4.1 HOW TO USE THE LINE PLUG
4.1.1 VOICE: C
EL
L
INE
®
is directly connected to a phone set
If your telephone set is directly connected to C
EL
L
INE
®
by means of the LINE plug the calls
are routed over the GSM network.
• Originated voice call
Follow the procedure here below:
• Lift the handset and check the presence of the dialling tone. The presence of a congestion
or engaged tone may mean that there is no GSM field or C
EL
L
INE
®
is already
transmitting/receiving data.
• Dial the number to call and wait for the connection. Between two different digits no more
than 5 seconds are allowed (factory default timeout) or exceed the timeout programmed
(see par. 5.1.2). In case of exceeding the timeout, C
EL
L
INE
®
will send the typed digits.
4
How to use
GSM
network
AS
AX DX
RS
ENGLISH