• To terminate the call, hang up the telephone handset.
ATTENTION: AT THE END OF A PHONE CALL IT IS NECESSARY TO WAIT FOR 4 SECONDS
BEFORE ATTEMPTING A NEW CALL WITH C
EL
L
INE
.
• Terminated voice call
When an incoming call is received, the telephone, connected to C
EL
L
INE
®
by means of the
LINE plug, rings. Simply lift the handset and answer the call. Telephones with enabled the
CLI visualization (Calling Line Identification) display the calling telephone number.
Furthermore,when the call waiting service is enabled, the incoming user telephone number
is displayed.
4.1.2 VOICE: C
EL
L
INE
®
is connected to a PBX through a 2-wire analogue line port
If the telephone terminal is a PBX extension (e.g. extension 130) connected to C
EL
L
INE
®
through a 2-wire analogue line port, calls can be routed over either the PSTN or GSM
network.
• Originated voice call toward PSTN or GSM network
Depending on the PBX model, two different situation may occour:
• Some PBX need typing a digit (or pressing a programmable button) to route the call
toward the PSTN or GSM network (e.g.: digit 0 allows to route toward GSM network, digit
1 toward PSTN). At the dialling tone, simply dial the subscriber’s telephone number.
Between two different digits no more than 5 seconds are allowed (factory default
timeout) or exceed the timeout programmed (see par. 5.1.2).
In case of exceeding the timeout, C
EL
L
INE
®
will send the typed digits.
• Some PBX recognizes the prefix of the called number and automatically routes the
outgoing call toward PSTN or GSM network.
60
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
© AUDIOTEL Engineering S.p.A.
PSTN
network
PBX
Other C.O. lines
Extension 130
2-wire analogue line port
®
AS
AX DX
RS
GSM
network
ENGLISH