61
C
EL
L
INE
®
AS-RS-AX-DX
USER MANUAL
© AUDIOTEL Engineering S.p.A.
• Terminated voice call
C
EL
L
INE
®
automatically forwards all the incoming calls to the PBX where they are processed
according to the PBX programming.
• Polarity reversal (programmable)
Whenever a call is either originated or terminated by the device, C
EL
L
INE
®
will generate a
polarity reversal on the LINE plug. It is a trick required to enable the PBX, with which
C
EL
L
INE
®
is connected, to directly recognise the origin and/or termination condition of a call.
4.1.3 FAX: C
EL
L
INE
®
is directly connected to an analog fax
It is possible to send/receive a G3 fax simply by connecting your G3 analogue FAX to the
PSTN connection point LINE of C
EL
L
INE
®
.
• User-defined digit for FAX
In order to comunicate to C
EL
L
INE
®
that You want to send a fax, it is necessary to put the
user-defined digit before the called fax number.
From the phone set/FAX connected to the LINE plug of C
EL
L
INE
®
, type the code:
#*#*4*2n
where “
n
” is the digit that need to be put before each FAX number.
Valid values are from
0
to
9
,
*
,
#
. (
*
is the DEFAULT digit)
If the entered value is valid, C
EL
L
INE
®
will generate a double tone as confirmation.
• Sending a FAX
Connect your analogue FAX to C
EL
L
INE
®
and switch it on. Insert the document that has to be
sent in the FAX and dial the phone number by placing before the user-defined digit.
Example: if you want to send a fax to 035 12345678 phone number, dial the following digits :
*03512345678 .
WARNING: if the FAX reports a sending error, C
EL
L
INE
will try to send the fax again up to a
maximum of 3 times.
GSM
network
AX DX
®
ENGLISH