AU Infobar C01, Основное руководство

Страница: 69 / 96

67
~ ~ ~ ~<MFZ>
shx12_e_09.fm
[67/73]
Mu
lt
im
e
d
ia
INFOBAR C01 has a CMOS camera with approximately 8.04 effective
megapixels for shooting photos and recording movies.
•
All the photos and movies shot/recorded are saved in a microSD
memory card. Insert a microSD memory card before using the
camera.
•
The mobile light flashes in red while each camera mode is activated.
•
If the camera lens is exposed to direct sunlight for a long time, the
internal color filter may discolor and it causes discoloration of shot
images.
•
The quality of images may deteriorate when shot or saved after the
INFOBAR C01 has been left in a warm location for a long time.
•
Although the camera is made of high-precision parts, some pixels
look constantly dark or bright. Further, blue, red, white dots, etc.
appear in images especially when shooting images in a very dark
place.
•
Fingerprints, fats, etc. on the lens may cause the images to blur.
Wipe the lens with a soft cloth such as cloths for cleaning glasses
before shooting images. The lens may be damaged if you wipe it
strongly.
•
Make sure that your fingers, hair, the straps of the INFOBAR C01,
etc. do not obscure the camera lens when shooting images. If the
straps interrupt you when shooting images, hold the straps with your
hand.
•
Be careful of camera shakes. Hold the INFOBAR C01 tight or use
the self-timer function since such shakes may cause the images to
blur.
Be careful of camera shakes especially in a place without enough
light such as inside of a room.
Also, images may blur when the subject of the images moves.
•
Before shooting images, make sure that the subject is completely
displayed. If you shoot images while moving the camera, the images
may blur.
•
Indoor fluorescent lighting may cause flickers (too fine to be seen
with human’s naked eyes) to be detected and light fringes may be
displayed. This is not a malfunction.
•
When shooting indoors, the display may become yellow. On the iida
Home, tap
Camera
[ [
White Balance
[
Fluorescent
/
Tungsten
to solve this problem.
•
When shooting images under incandescent lamps etc., the display
may become red. On the iida Home, tap
Camera
[ [
White
Balance
[
Tungsten
to solve this problem.
•
Make sure that the microphone is not covered by your fingers etc.
when recording movies. Also, the quality of its sounds may
deteriorate depending on the voice volume and surrounding
environment during the recording.
•
The color and brightness of the subject of images shot with the
INFOBAR C01 may differ from the actual color and brightness.
Because of the characteristics of the lens, some part of the images
may appear dark or light depending on the subject and light ray
while shooting. Also, note that some part of the subject in the images
may be distorted due to the usage of wide-angle lens.
•
Purple lines and bars may be displayed on images while recording
strong light or shiny subject. This is not a malfunction.
Using the Camera
Cautions for Using the Camera
shx12_ue.book 67 ページ ２０１２年２月１６日 木曜日 午後２時５６分