viii
Appendix
CLI error messages
The following error messages may be returned by the Command line Interface
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID Member index
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR
Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command
Line Interface commands, their defaults, and an
example of how to enter the commands.
Commands which have no default values have a
blank entry in that column of the table.
CAUTION
CAUTION
Do not use CLI unless you are directed to by an ATTO technician. Changing parameters may
cause loss of data and/or disruption to performance and reliability of the FastStream.
The ExpressNAV interface is the preferred method to operate and manage the FastStream VT.
Refer to
Interface options
on page 27 for details.
sb
SCSI bus number (1<= sb <= 2)
sl
SCSI lun ID (0 <= sl <= 7)
st
SCSI target ID (0 <= st <= 15)
Designation
Indicates
Command
Default
Example
AutoMap
automap
AutoResume
all enabled
set autoresume all disabled
BlockDevClean
blockdevclean 1
BlockDevIdentify
blockdevidentify 1
BlockDevIDStop
blockdevidstop
BlockDevScan
blockdevscan
BridgeModel
get bridgemodel
BridgeName
“ “
set bridgename Omega6
ClearEventLog
cleareventlog
Date
01/01/2000
set date 03/03/03
DefaultInterleave
128
set defaultinterleave 64
