manualshive.com logo in svg

Atomic AmpliFire, Руководство пользователя, Страница: 50 / 59

Поделиться
Скачать
Atomic AmpliFire Скачать руководство пользователя страница 50

50

gLobAL SETTINgS  

CONTINUED . . . 

LEVEL ASSIgN: 

Chooses which output(s) should be affected by changes of the LEVEL 

knob . The options are ALL OUTPUTS, MAINS + PHONES, AUX + PHONES, or PHONES 

only .

TAP TEMPo ModE: 

Selects the mode of operation for the tap tempo switch . The 

options are:

gLobAL: 

All presets follow the tempo set by the GLOBAL BPM (see below). This 

overrides the PRESET BPM while set to global . 

PRESET: 

Each preset ignores the GLOBAL BPM and follows the BPM of the 

currently selected preset . 

gLobAL bPM: 

When TAP TEMPO mode is set to GLOBAL then the GLOBAL BPM is 

in effect for all presets . It can be set to a value here and updated via the tap tempo 

switch . 

MIdI IN (off/1-16/oMNI): 

Selects the MIDI IN channel on which AMPLIFIRE will 

listen and respond to incoming MIDI messages. Set to a specific channel (1-16) or set 

to OMNI to listen on all channels . See the MIDI section below for more detail . 

MIdI oUT (off/1-16/oMNI): 

Selects the MIDI OUT channel on which AMPLIFIRE will 

transmit MIDI messages. Set to a specific channel (1-16) or set to OMNI to broadcast 

on all channels . See the MIDI section below for more detail . 

MIdI THRU (off/oN): 

When MIDI THRU is set to ON the AMPLIFIRE will pass 

through all MIDI messages from the MIDI IN to the MIDI OUT . This enables daisy-

chaining multiple MIDI devices together . 

MIdI cLocK (off/INPUT/oUPUT): 

Allows the AMPLIFIRE to transmit or receive a 

MIDI CLOCK signal . When set to INPUT the AMPLIFIRE will listen and respond to MIDI 

CLOCK messages on MIDI IN and set the BPM accordingly . When set to OUTPUT the 

AMPLIFIRE will transmit the current BPM via the MIDI OUT port . 

PRESET INdEX:

 Selects the numbering of the presets:

0-127:

 Presets are numbered starting from 0 and running up to 127 .

1-128:

 Same presets are numbered starting from 1 and running up to 128 .

TUNER SILENT (off/oN): 

Turning this to ON will engage a silent tuning mode 

whenever the Tuner is engaged . In this mode, the INPUT is muted . This enables silent 

tuning when the Tuner is engaged . 

TUNER REf (Hz): 

Set the reference frequency of Concert A for the tuner . The default 

frequency is A440 .0Hz . 

coNTRAST (1-10): 

Allows customization of the display contrast. Useful for adjusting 

visibility for different viewing angles. Adjust as needed for best readibility.  

Содержание AmpliFire




























































Отзывы:

Нет отзывов