manualshive.com logo in svg

Atomic AmpliFire, Руководство пользователя, Страница: 33 / 59

Поделиться
Скачать
Atomic AmpliFire Скачать руководство пользователя страница 33

33

PARAMETER SETTINgS - 

EffEcTS

 

CONTINUED . . .

PHASER

ENAbLE: 

Turns the PHASER effect on or off . Select ACTIVE to turn it on . Select 

BYPASSED to turn it off .

INSERT: 

Positions the PHASER effect . Choose PRE to position the effect in the PRE-

EFFECTS section (mono, before the amp model). Choose POST to position the effect 

in the POST-EFFECTS section (stereo, after the amp model).

LEVEL (db): 

Adjusts the level of the output from the PHASER effect. 

dEPTH (0-100%): 

Controls the depth of the LFO . As depth is increased, the LFO will 

have a wider sweep range . This means that the notch filters formed by the PHASER 

will sweep across a wider range of frequencies . 

WIdTH (0-100%): 

Controls the amount of stereo panning of the PHASER from 0% 

(fully summed to mono) to 100% (full stereo panning). The INSERT must be in POST 

mode for stereo operation . 

SPEEd (Hz): 

Controls the rate at which the LFO oscillates . The output of the LFO is 

used to sweep the center frequencies of a selectable number (see STAGES below) 

of notch filters . SPEED controls how quickly these notch filters sweep through the 

range of frequencies . 

SWEEP (0-100%): 

Controls the sweep range of the notch filters . Set to a higher 

percentage to sweep across a wider range of frequencies . 

REgEN (0-100%): 

Controls the amount of regeneration (or feedback) of the PHASER. 

Adding regeneration causes the peaks around the notch filters to grow more sharp 

and the filters become more resonant . 

WAVE (0-100%): 

Adjusts the geometric shape of the LFO. The LFO shape is 

adjustable from full triangle wave (0%) to full sine wave (100%) or anywhere in 

between .

dUTY (0-100%): 

Adjusts the rise and fall time of the LFO. At 50%, the LFO will rise 

and fall at the same rate . The percentage indicates what portion of one LFO period 

will be spent during the rise. For example, at 25% it will rise for 1/4 of the total period 

of one LFO cycle and fall in 3/4 of the period . So it will rise three times as quickly as 

it falls. Set to 100% for a constantly rising (or “barberpole”) PHASER effect. 

PHASE (0-359°): 

Controls the phase relationship between the left channel LFO and 

the right channel LFO for the stereo PHASER . This allows some of the notches to 

be sweeping up on one channel while the other channel sweep’s down. Note: The 

PHASER must be in POST position for it to operate in stereo mode . 

STAgES (2-4-6-8-10-12): 

Controls the number of notch filters present in the 

PHASER . More stages results in more notches which produces a more dramatic 

PHASER effect . 

Содержание AmpliFire




























































Отзывы:

Нет отзывов