manualshive.com logo in svg

Atomic AmpliFire, Руководство пользователя, Страница: 12 / 59

Поделиться
Скачать
Atomic AmpliFire Скачать руководство пользователя страница 12

12

EffEcTS ANd SIgNAL cHAIN

AMPLIFIRE offers studio-quality effects developed by Studio Devil . They are arranged 

into the following signal chain categories (Editor designation is noted in parentheses):

You can choose to place most of these effects either prior to or after the AMP block 

to allow versatility in pre or post processing of your amplifier tone . Simply select 

PRE or POST under the ROUTING section of the Editor screen .
Think of the the effects prior to as the pedals that you run into your amp, and the 

effects after as any stereo studio effects you would place onto your amp after it is 

mic’d up (either on a live mixing board, or in a recording studio).
All signals placed before are mono, and all signals after are stereo . So, any stereo 

effects placed before the AMP block will operate in MONO mode . 

dEScRIPTIoNS

•   The gATE effect provides a programmable NOISE SUPRESSOR, EXPANDER, 

and GATE. Some of the GATE parameters are global settings, so that you don’t 

need to change all your presets if you change your guitar. NOISE GATE enable 

is programmed per preset, so that you can shut it off for particular presets, and 

leave it on for others. These options can be set in the GATE effect menu.

•   The VoLUME effect models a VOLUME pedal control. The VOLUME options can 

be set in the VOLUME effect menu. It can be repositioned across the signal chain 

for maximum flexibility.

•   The WAH effect models a WAH-WAH effects pedal. The WAH-WAH is fully 

customizable and the options are set in the WAH-WAH effect menu. In addition 

to expression pedal control, the WAH also features AUTO-WAH and TOUCH-

WAH style effects. 

•   The coMP effect models a compressor module for controlling the dynamics of 

your guitar input. The COMPRESSOR options can be set in the COMPRESSOR 

effect menu.

•   The booST effect models classic stomp box distortion effects. It is typically 

placed toward the beginning of the signal chain to drive the front end of the 

amp model and tighten tone, but it can be placed elsewhere if you’re feeling 

experimental. 

NoISE gATE (gTE)
coMPRESSoR (cMP)
PRE EQ  (PRE)
WAH (WAH)
VoLUME (VoL)
dISToRTIoN / 

ScREAMER / 

oVERdRIVE/ fUZZ / 

cLEAN booST (bST)

PARAMETRIc EQ / 

PRogRAMMAbLE 

fILTER (PQ1/2/3)
gRAPHIc EQ (gEQ)
TREMoLo / PANNER 

(TRE)
cHoRUS (cHo)
fLANgER (fLA)
PHASER (PHA)

EcHo / MULTI-TAP 

dELAY (Eco)
REVERb (RVb)

Содержание AmpliFire




























































Отзывы:

Нет отзывов