manualshive.com logo in svg

Atomic AmpliFire, Руководство пользователя, Страница: 21 / 59

Поделиться
Скачать
Atomic AmpliFire Скачать руководство пользователя страница 21

21

PARAMETER SETTINgS 

AMP

ModEL:

 Selects the amplifier model from the list of available amp models . Choose 

NONE to bypass the amp model .

ENAbLE:

 Enables or disables the amp modeling effect . Choose ACTIVE to enable the 

amp modeling or BYPASSED to disable the amp modeling .

gAIN:

 Sets the gain control knob of the amplifier from 0.0 (minimum) to 10.0 

(maximum).

bASS: 

Sets the bass control knob of the amplifier tone stack from 0.0 (minimum) to 

10.0 (maximum).

MIdS:

 Sets the mids control knob of the amplifier tone stack from 0.0 (minimum) to 

10.0 (maximum).

TREbLE: 

Sets the treble control knob of the amplifier tone stack from 0.0 (minimum) 

to 10.0 (maximum).

PRESENcE:

 Sets the presence control knob of the power amplifier from 0 .0 

(minimum) to 10.0 (maximum).

MASTER:

 Sets the master volume control knob of the power amplifier from 0 .0 

(minimum) to 10.0 (maximum).

LEVEL (db):

 Adjusts the final output level of the amp model. This control helps to 

match the level of your preset with other presets .

dAMPINg:

 Adjusts the damping factor of the power amp model from 0% to 100%. Set 

at 100% for normal power amp operation. Lowering the damping results in more bass 

resonance and more presence .

PoWERAMP ENAbLE:

 Separately enable the power amp section of the amp model . 

This is a GLOBAL parameter . When using your pedal with a real tube power amp, you 

can optionally turn off the simulated tube power amp by selecting DISABLED here . 

Most times you will just want to leave this parameter ENABLED.

AMP bUTToN:

 Assign the AMP ENABLE functionality to the selected footswitch . 

Pressing the assigned footswitch will toggle between ACTIVE and BYPASS mode of 

the amp model . Please note that the assigned footswitch must be in PRESET ASSIGN 

mode .

Содержание AmpliFire




























































Отзывы:

Нет отзывов