Atomic AmpliFire, Руководство пользователя, Страница: 42 / 59

42
PARAMETER SETTINgS
CONTINUED . . .
INSERT: positions the GRAPHIC EQ effect . Choose PRE to position the effect in the
PRE-EFFECTS section (mono, before the amp model). Choose POST to position the
effect in the POST-EFFECTS section (stereo, after the amp model).
LEVEL: Adjusts the output level of the GRAPHIC EQ effect in dB to match the
bypassed level or to just provide additional overall boost or cut to the effect.
80, 160, 320, 640, 1.2K, 2.6K, 5.1K, LEVEL: Adjusts the amount of boost or cut for
each of the equalizer bands of the GRAPHIC EQ effect in dB .
bUTToN: Assign the GRAPHIC EQ ENABLE functionality to the selected footswitch .
Pressing the assigned footswitch will toggle between ACTIVE and BYPASS mode
of the GRAPHIC EQ . Please note that the assigned footswitch must be in PRESET
ASSIGN mode .
PRE EQ
ENAbLE: Turns the PRE EQ filter effect on or off . Select ACTIVE to turn it on . Select
BYPASSED to turn it off .
TYPE: Selects the type of filter. Choose from the following:
NoNE: Disables the filter even when it is ACTIVE .
gAIN oNLY: Applies only gain (across all frequencies). In this mode, only the LEVEL
parameter has effect .
LoWPASS 1: Applies a first-order low pass filter which passes bass (lows) and
rolls off treble (highs). This filter begins to roll off (cut) high frequencies above the
value set in the FREQUENCY parameter . It passes all low frequencies below the
FREQUENCY parameter at the level set with the LEVEL parameter . This filter is
not affected by the Q control .
HIgHPASS 1: Applies a first-order high pass filter which passes treble (highs) and
rolls off bass (lows). This filter begins to roll off (cut) low frequencies below the
value set in the FREQUENCY parameter . It passes all high frequencies above the
FREQUENCY parameter at the level set with the LEVEL parameter . This filter is
not affected by the Q control .
LoW SHELf 1: Applies a first-order low shelf filter which changes the level of the
bass (lows) and leaves treble (highs) unaffected. This filter boosts (or cuts) low
frequencies below the value set in the FREQUENCY parameter by the amount
set with the LEVEL parameter . It leaves high frequencies above the FREQUENCY
parameter unaffected . This filter is not affected by the Q control .
HIgH SHELf 1: Applies a first-order high shelf filter which changes the level of the
treble (highs) and leaves bass (lows) unaffected. This filter boosts (or cuts) high
frequencies above the value set in the FREQUENCY parameter by the amount
set with the LEVEL parameter . It leaves low frequencies below the FREQUENCY
parameter unaffected . This filter is not affected by the Q control .