manualshive.com logo in svg

Atomic AmpliFire, Руководство пользователя, Страница: 28 / 59

Поделиться
Скачать
Atomic AmpliFire Скачать руководство пользователя страница 28

28

PARAMETER SETTINgS  

CONTINUED . . .

REVERb

ENAbLE: 

Turns the REVERB effect on or off . Select ACTIVE to turn it on . Select 

BYPASSED to turn it off .

TYPE: 

Select from the following REVERB modes / styles:

SMALL: 

simulates the reverb of a small room .

MEdIUM:

 simulates the reverb of a medium-sized club or small hall .

LARgE: 

simulates the reverb of a large sized venue or large concert hall .

SPRINg: 

simulates the reverb of a spring reverb tank .

SPRINg2: 

simulates the reverb of a classic “D’Luxe”-type amp.

LEVEL (db):

 Controls the level of the reverb effect only. Adjust to blend the right 

amount of reverb with your dry (unaffected) signal.

dEcAY (0-100%):

 Controls the decay time (size) of the reverb from 0% (minimum size) 

to 100% (maximum size).

LoW-fREQUENcY dAMPINg (0-100%): 

Controls the amount of dampening of low-

frequency (bass) in the simulated room acoustics from 0% (most amount of bass) to 

100% (least amount of bass).

HIgH-fREQUENcY dAMPINg (0-100%): 

Controls the amount of dampening of high-

frequency (treble) in the simulated room acoustics from 0% (least amount of treble) to 

100% (full amount of treble).

dIffUSIoN (0-100%): 

Controls the amount of stereo diffusion of the reverb from 0% 

to 100%.

WIdTH (0-100%): 

Controls the amount of stereo separation of the reverb from 0% 

(fully summed to mono) to 100% (full stereo panning).

PREdELAY (milliseconds): 

Controls the amount of PREDELAY feeding into the reverb 

unit . Used to simulate very large spaces where the first echo splash from the reverb 

occurs only after a predelay time. Adjust from 0 to 100 milliseconds.

SPILLoVER (oN/off): 

Controls if the reverb effect continues to decay after changing 

presets (spilling over into the next preset). This parameter is per preset and controls 

if the reverb tail spills over when ENTERING (switching to) that preset. Setting this 

parameter to ENABLED means that any remaining reverb from the previous preset 

will continue to spillover when you switch to THIS preset . Setting this parameter 

to DISABLED means that when entering THIS preset, any remaining reverb will be 

reset . If the REVERB effect is set differently in the switched preset from the previous 

preset, the reverb will change to the sound indicated by the new preset . If you want 

the reverb character to sound identical between two (or more) presets, make sure to 

set the REVERB parameters the same in all of them .

Содержание AmpliFire




























































Отзывы:

Нет отзывов