Atomic AmpliFire, Руководство пользователя, Страница: 38 / 59

38
PARAMETER SETTINgS
CONTINUED . . .
PARAM A: Selects the parameter for expression pedal “A” to control. You may choose
from any non-global, non-menu type parameters (normal continuous parameters)
within your preset .
MIN A: Sets the minimum value of the selected PARAM A . This represents the value
of the parameter when EXPRESSION PEDAL A is in the heel (minimum) position.
MAX A: Sets the maximum value of the selected PARAM A. This represents the value
of the parameter when EXPRESSION PEDAL A is in the toe (maximum) position.
PARAM b: Selects the parameter for expression pedal “B” to control. You may choose
from any non-global, non-menu type parameters (normal continuous parameters)
within your preset .
MIN b: Sets the minimum value of the selected PARAM B . This represents the value
of the parameter when EXPRESSION PEDAL B is in the heel (minimum) position.
MAX b: Sets the maximum value of the selected PARAM B. This represents the value
of the parameter when EXPRESSION PEDAL B is in the toe (maximum) position.
bUTToN: Assign the LOOP ENABLE functionality to the selected footswitch . Pressing
the assigned footswitch will toggle between ACTIVE and BYPASS mode of the LOOP .
Please note that the assigned footswitch must be in PRESET ASSIGN mode .
WAH WAH
ENAbLE: Turns the WAH-WAH effect on or off . Select ACTIVE to turn it on . Select
BYPASSED to turn it off .
ModE: Select from 3 different modes for control of the WAH WAH:
NoRMAL: The pedal-position of the wah is controlled by the PEDAL parameter (see
below). This is typically assigned to an EXPRESSION pedal input. Or may be set to a
fixed position for a “cocked-wah” type sound.
T-WAH: Selects a “touch-wah” mode. In this mode, the pedal position of the wah
is automatically adjusted by an input level detector. Signals of greater amplitude
(more aggressive playing) will cause the wah to move to the toe down position and
it will automatically move back to the heel position as the signalj amplitude decays.
Lfo-WAH: Selects a “Low Frequency Oscillator” mode where the pedal position
of the wah will adjust automatically according to the position of an LFO. Allows for
interesting tempo synced wah effects .
PEdAL (0-100%): Sets the position of the WAH-WAH pedal from 0% (down or heel
position) to 100% (up or toe position). This can be set to a fixed position for a “cocked-
WAH” sound, or assigned to an EXPRESSION PEDAL or MIDI for continuous control
(see EXPRESSION PEDAL and MIDI sections).
TAPER (0-100%): TAPER controls the mid-point of the overall travel range of the
WAH. At 50%, the TAPER is exactly linear. Below 50%, it is an audio TAPER and above
50% it is a reverse audio TAPER.