ATN PIAF 10E 2018, Инструкция по безопасности и техническому обслуживанию

Страница: 39 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
39
DANGER
CHECK THE TAIL GATE HAS A LOAD
CAPACITY OF MIN 3000 KG.
ENSURE THE LOAD IS CENTERED ON
THE TAIL GATE.
THE PLATFORM MUST BE EMPTY
WHEN LOADING OR UNLOADING THE
MACHINE.
DANGER
THE MACHINE CAN ONLY BE TOWED
IF FULLY LOWERED.
WARNING
TO PREVENT IMPORTANT DAMAGES
TO
THE DRIVE SYSTEM, THE
MACHINE CAN ONLY BE TOWED
OVER SHORT DISTANCES AT A VERY
SLOW SPEED.
4.5. TRANSPORTATION OF THE PLATFORM
4.5.1 DRIVING ON A SLOPE
To prevent any accident while driving on a slope, ensure its grade is lower than 25%. The platform
must be fully lowered, in
slow speed and the basket must always be on the lower side of the
slope.
4.5.2 USING A TAILGATE
4.5.3 USING A FORKLIFT TRUCK
The machine must be handled following the instructions for positioning
the forks. Failure to do so will cause the platform to topple over.
- NOTE -
It is possible to tow or pull the machine.
4.5.4 TOWING THE PLATFORM
You must ensure an adequate tractor is used to tow the machine. Use
the rings on the chassis provided for this purpose as anchoring points.
Failure to do so can result in damage to the machine’s structure. Check
the machine is on firm and horizontal grounds before releasing the
brakes.