ATN PIAF 10E 2018, Инструкция по безопасности и техническому обслуживанию

Страница: 37 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
37
DANGER
DO NOT USE THE MACHINE DURING
THE CHARGE. FAILURE TO DO SO
COULD
RESULT IN RAPID AND
IRREVERSIBLE DETERIORATION OF
THE
MACHINE AND OF THE
CHARGER.
DANGER
DURING THE CHARGE, BATTERIES
EMIT HYDROGEN (EXPLOSIVE GAZ).
ALWAYS CHARGE THE BATTERY IN
WELL VENTILATED AREAS, AWAY
FROM FLAMES OR SPARKS. FAILURE
TO
DO SO COULD RESULT IN
BATTERY EXPLOSION AND DEATH OR
SERIOUS INJURIES.
DANGER
BATTERIES CONTAIN SULFURIC ACID
(HIGHLY CORROSIVE). YOU MUST
WEAR APPROPRIATE GLOVES AND
PROTECTION GLASSES DURING ANY
OPERATION ON THE BATTERY.
NORMAL OPERATION
1- Plug the charger to a mains socket.
2- The RED Led indicates the
start of the charging cycle.
3- The YELLOW Led indicates
the battery is 80% charged.
4- The GREEN Led indicates
the battery is 100%
charged.
5- At the end of the charge, the charger must be
unplugged from the mains.
CHARGING CURVE
The charging cycle starts as soon as the charger is
connected to the power supply.
The charge may not start if the battery voltage is
below 9V (for a battery with a 24V rated voltage).
EQUALISATION CHARGE AND DE-
SULPHATISATION
This charge starts automatically 15 minutes after the end of each complete charge.
MAINTENANCE CHARGE
The charger starts a charging cycle every 48 hours after the end of the previous charge if it stays
connected to the power supply to make up for the auto-discharge.
4.4.2 BATTERIES
- Check the battery state of charge using the
indicator.
- Check the electrolyte level and add water only
after the charge.
- Do not operate the machine when the battery is
too discharged. This would damage the electrical
components.
- Check the condition of the cable connections.
4.4.1 WHEEL CONDITION
Check the good general condition of the tyres: absence of cuts, foreign bodies imbedded in the
rubber, tear or abnormal wear. Ensure nuts and bolts are perfectly tightened.