ATN PIAF 10E 2018, Инструкция по безопасности и техническому обслуживанию

Страница: 28 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
28
DANGER
RELEASE THE BRAKES ONLY IF THE
MACHINE IS FULL LOWERED AND
STANDS ON FLAT AND HORIZONTAL
GROUNDS.
1- Control station selector switch:
Used to activate the controls on the work platform control station or the
ground control station. In position O, the key may be removed.
2- Enable button :
This button must be pushed and held to control the movements from the
ground control station.
3- Structure rotation control switch:
Depress and hold the enable button and activate this switch to control the
rotation of the structure to the right or to the left.
4- Mast Up / Down control switch :
Depress and hold the enable button and activate this switch to control the Up
/ Down movement of the mast.
5- Jib Up / Down control switch :
Depress and hold the enable button and activate this switch to control the Up
/ Down movement of the Jib.
6- Battery/hour meter discharge indicator:
This is an indicator light which indicates the state of charge of the battery and
counts the operating hours of the machine.
7- Emergency Stop switch :
PUSH to CUT OFF the electric supply to all the functions of the machine.
TURN by a quarter turn to restore the machine functions.
- NOTE-
All the light indicators will light up for a few seconds and the buzzer will
sound briefly: this will enable you to control the good operating order of the
alarm devices
.
8- Indicator light : brakes released:
This indicator lights up to warn the operator that the machine is in freewheel
once the brake release switch on the right hand side of the ground control
station has been activated.
Refer to § 4.2.4 BRAKE RELEASE FOR TOWING.
9- Overload Indicator light :
This indicator lights up to warn the operator that the platform is overloaded.
-NOTE-
The machine stops when this indicator lights up. To revert to normal
operation, the platform must be unloaded.