Overview
26
Synapse SB67020/SB67025 Deskset User’s Guide
Back to Contents
Cordless Headset Operation
Table 10 TL7600 Cordless Headset Operation
Function
Operation
Ringtone
silencing
Press
MUTE/
FLASH
to temporarily silence the ringtone in the headset earpiece.
This silences the ringtone without disconnecting the call. The next incoming call
rings normally at the preset volume.
Volume control
While on a call, use the
/
–
keys on the side of the headset to adjust the
listening volume.
Mute
Press
MUTE/
FLASH
to turn the headset microphone on or off. When mute is on,
there is a short beep every 10 seconds until mute is turned off.
Answering a call
Press
ON/
OFF
on the headset.
Ending a call
Press
ON
/OFF
on the headset.
Auto off
A call ends automatically when you put the headset in the charger.
Alert tones
You hear three short beeps when:
/
–
keys are pressed when the volume is already at its highest or
lowest setting.
The headset is not registered and the headset
ON/OFF
button was pressed.
The headset has gone out of range from the Deskset during a call.
Low battery
warning
You hear 1 short beep every 20 seconds when the battery is low.
Key beep
You hear 1 short beep when pressing the headset
ON/OFF
key to start or end a
call.
ON/OFF
light
status
On — Headset is registered to the Deskset and is charging in the headset charger.
Flashes quickly — There is an incoming call.
Flashes three times followed by a pause — The battery level is very low. The cycle
repeats three more times before the headset shuts down.
Flashes twice in orange and blue every five seconds — The headset is not
registered.
Flashes every 20 seconds — The battery is low and needs to be charged in the
headset charger.
Flashes every three seconds — The headset is in use.
i
The
MUTE
button on the Deskset does not mute the Cordless Headset.