AT&T MERLIN LEGEND MLX- 10D Скачать руководство пользователя страница 87

Страница: 87 / 137

Using Features

To Use Leave Message

When a call is unanswered or busy (you are listening to

ringing or busy tone):

1. Press

Feature.

2. Select

MsgLeave[LvMsg].

If this feature is not displayed, press

More.

3. Read status of

message on display

■

Message Sent To…

message was delivered.

■

Message Box Full

if co-worker’s message box is full.

■

Cannot Send Message

if message was not delivered for

any other reason.

Send/Remove Message

When you have a message for a co-worker who does not have
voice-mail and has a non-display phone, use Send/Remove

Message to turn on his or her message light. Only system

operators can turn on a message light on a non-display

phone.

The

Send/Remove Message

button also turns off a co-

worker’s message light (on a phone without a display) and
cancels the operator message delivered to a display phone.

The red light next to a co-worker’s Auto Dial button shows the

status of the co-worker’s message light. If you have a DSS,

use the

Message

Status

button to check your co-worker’s

message light (look at the red light next to the DSS button for
the co-worker’s extension).

4-24 Messaging

Содержание MERLIN LEGEND MLX- 10D










































































































































Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы:

Похожие инструкции для MERLIN LEGEND MLX- 10D

Бренды по названию

Популярные бренды

AT&T MERLIN LEGEND MLX- 10D, Руководство оператора

Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы:

Похожие инструкции для MERLIN LEGEND MLX- 10D

Бренды по названию

Популярные бренды