AT&T MERLIN LEGEND MLX- 10D Скачать руководство пользователя страница 85

Страница: 85 / 137

Using Features

Notes:

■

Automatic call delivery cannot be activated during a call.
You must complete the call before pressing the

Headset

Auto Answer

button.

If you are using Headset Auto Answer and you share a line

with other operators, use Privacy to prevent other
operators from answering the same calls.
To delete Headset Status from a programmed line button,
you must first switch to the handset.

To Turn off the Headset

You can turn off the headset

during a call

by using

■

Headset/Handset Mute.

Press once and you can’t be

heard through the headset. Press again to resume
conversation.

■

Speaker.

Press once to transfer the call from your headset

to the speakerphone. Press again to return the call to the
headset.

Note:

If the call is disconnected while the speakerphone is in

use, automatic call delivery turns off. You must press

Speaker

again to turn it on again.

4-22 Headset Features

Содержание MERLIN LEGEND MLX- 10D










































































































































Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы:

AT&T MERLIN LEGEND MLX- 10D, Руководство оператора, Страница: 85 / 137

Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы: