manualshive.com logo in svg

AT&T MERLIN LEGEND MLX- 10D, Руководство оператора, Страница: 56 / 137

Поделиться
Скачать
AT&T MERLIN LEGEND MLX- 10D Скачать руководство пользователя страница 56

Handling Calls

To Transfer to Outside Numbers

Before you transfer calls to outside numbers, check with your
system manager. Your communications system may have
restrictions on outside transfers.

1.

2.

3.

4.

Press 

Transfer.

The call is put on hold automatically (line with held call shows fast flashing

green light).

Press an SA or 

line button 

to get an outside line.

You hear dial tone.

If using an SA button, dial 

dial-out code 

or press 

DSS button

with dial-out code.

Dial outside number.

■ 

If person is available,

headset.

Call is transferred.

■ 

If person is unavailab

and 

take 

a message.

Notes:

hang up, press 

Speaker, 

or use

e, press 

SA 

or 

line button 

with held call

■

Calls transferred to outside numbers may vary in

transmission quality.

■

If your system has One-Touch Transfer, a transfer is

automatically set up when you press a 

DSS 

button for a

dial-out code while on an outside call. (You do not need

to press 

Transfer 

or an SA button first.) If you do not

want to transfer the call, press the 

Hold 

button before

you press the 

DSS 

button.

Transferring Calls  2-13

Содержание MERLIN LEGEND MLX- 10D










































































































































Отзывы:

Нет отзывов