AT&T MERLIN LEGEND MLX- 10D Скачать руководство пользователя страница 54

Страница: 54 / 137

Handling Calls

With manual completion:

1. Check the light next to the DSS or Auto Dial button for the

extension.

■

If the light is on, co-worker is unavailable. See Notes.

■

If the light is off, go to step 2.

2. Press the

DSS

Auto Dial

button for the extension.

3. For an unannounced transfer, hang up, press

Speaker,

or use

the headset.

The call is transferred.

For an announced transfer, announce the call.

■

If co-worker can take the call, hang up, press

Speaker,

or use

the headset.

The call is transferred.

If co-worker cannot take the call, press the

line button

with the

held call (flashing green light) to return to the caller. See Notes.

Notes:

If your console does not have DSS or Auto Dial buttons or

your system is not programmed for One-Touch Transfer,

see “To Transfer Without One-Touch Transfer.”

If co-worker is unavailable, see “Handling Unsuccessful

Transfers’ in this chapter.

If your console has SA buttons, you must have a free SA
button to transfer an outside call using a DSS or Auto Dial
button.

Transferring Calls 2-11

Содержание MERLIN LEGEND MLX- 10D










































































































































Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы:

Похожие инструкции для MERLIN LEGEND MLX- 10D

Бренды по названию

Популярные бренды

AT&T MERLIN LEGEND MLX- 10D, Руководство оператора

Результаты поиска

Содержание MERLIN LEGEND MLX- 10D

Отзывы:

Похожие инструкции для MERLIN LEGEND MLX- 10D

Бренды по названию

Популярные бренды