Asus DS300f, Руководство пользователя

Страница: 296 / 449

277
Chapter 6: Management with the CLU
Shutting Down the Subsystem
There are two methods for shutting down the subsystem, depending on your
connection. Choose the applicable procedure:
•
Shutting down the ASUS Storage
– Telnet Connection (page 277)
•
Shutting down the ASUS Storage
– Serial Connection (page 278)
Important
If you have a JBOD expansion, always power off the RAID
subsystem first. Then power off the JBOD expansion units.
Shutting down the ASUS Storage
– Telnet Connection
This function enables you to shut down the ASUS Storage subsystem on a Telnet
connection. Additional action is required, as described below.
To shut down the ASUS Storage:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Do one of the following actions:
•
Highlight Option and press the spacebar to display Shutdown .
•
Highlight Option and press the spacebar to display Poweroff .
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait for no less than two minutes.
7. Do one of the following actions:
•
If you chose the Shutdown Option, manually turn off the power supply
switch (both switches with redundant power supplies) on the back of the
subsystem.
•
If you chose the Poweroff Option, the subsystem powers down
automatically. On subsystems with redundant power supplies, unplug
the power cords and plug them back in, to activate the power switches.
Caution
After you power off the subsystem, wait at least 10 seconds before
you power on the subsystem again.