Asus DS300f, Руководство пользователя

Страница: 270 / 449

251
Chapter 6: Management with the CLU
4. Highlight, press the backspace key to erase the current value, and type a
new value for each of the following items:
•
Node Name
– An iSCSI node is identified by its name.
•
Node Alias
– Optional. Maximum of 31 characters. Use letters,
numbers, space between words and underscore.
•
Max Burst Length
– Maximum length of a solicited data sequence
(512 b to 16 Mb).
•
Default Time to Wait
– After a dropped connection, the number of
seconds to wait before attempting to reconnect.
•
Default Time to Retain
– Number of seconds after time to wait (above)
before reassigning outstanding commands.
5. Highlight, then press the space bar to enable or disable the following
features:
•
Header Digest
– Enables use of Header Digest (CRC). See note below.
•
Data Digest
– Enables use of a Data Digest (CRC). See note below.
•
Uni-directional CHAP Authentication
– Enables Challenge
Handshake Authentication Protocol
•
Bi-directional CHAP Authentication
6. Press Ctrl-A to save your settings.
Notes
•
Header Digest and Data Digest work best with initiators
equipped with a TCP Offload Engine (TOE). Refer to your
iSCSI HBA user manual for more information.
•
For iSCSI network settings on the Data Port
s, see ―Making
iSCSI Port Settings‖ on page 244.
• For CHAPs, see ―Working with iSCSI CHAPs‖ on page 254.
Viewing iSCSI Target Ports
You can see the target port settings, but none of these values are user-adjustable
in the current version of the software.
To view the iSCSI target port settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
3. Highlight Target Port 1 , Target Port 2 , Target Port 3 , or Target Port 4 and
press Enter.