Astralpool 54092, Руководство по установке и обслуживанию

Страница: 4 / 32

4
5.2.1. Electrical connection diagram
For correct installation, you will need the Modulator, the transformer and finally the leds lamp. As an option, this system can be controlled by
Remote Control. For more information on the installation of the Modulator.
The Modulator is connected to the 230 Vac mains by means of two terminals indicated MAINS, and to the primary input of the transformer (230
Vac) by means of the terminals indicated TRF (See attached diagram).
The transformer must have the capacity to supply 60 VA to each led lamp connected. For example, if you want to control 5 lamps, they should
be connected in parallel to a transformer of at least 300VA.
Each Modulator can control up to a maximum of 15 LED spotlights.
Once the unit is connected, proceed as follows to start-up the projector for the first time:
•
Switch on the unit by activating the 230 Vac. at the input of the Modulator, which will automatically syntonize with the transformer. The green
led of the Modulator will flash every 2 seconds and the lamp will remain off.
5.2.2 Types of lighting
The Remote Control – Modulator – Transformer – Led Projector unit enables you to create different lighting settings inside the pool with
two operation options:
Set colour : Selection of a set colour among twelve possibilities.
1 Red 7 Sky-blue
2 Green 8 Pale Violet
3 Blue 9 Orange
4 Yellow 10 Magenta
5 Cyan 11 Emerald green
6 Purple 12 White
Automatic sequence of colours : Selection of eight colour sequence programmes. Each programme is defined by the lighting time of each
colour and the transition time from one colour to another according to the following table:
SEQUENCE
1 Red Green Blue
2 Cyan Purple Yellow
3 Green
Emerald
green
Cyan Sky-blue Blue Sky-blue Cian
Emerald
green
4 Red Orange Green Naranja
5 Red Magenta Blue Magenta
6 Red Orange Green Cyan Blue Magenta
7
Pale
Violet
Purple Cyan Yellow White Yellow Cyan Purple
8 Red Green Blue Yellow Cian Purple
Pale
Violet
Sky-blue Orange Magenta
Emerald
green
White
6. MAINTENANCE:
This lamp does not require any type of maintenance work. If you notice that the lamp is not working properly, please contact our customer
attention service.
THIS PRODUCT DOES NOT CONTAIN ANY ELEMENTS THAT CAN BE HANDLED, DISMANTLED OR REPLACED BY THE USER. IT IS
FORBIDDEN TO ACCESS INSIDE THE PRODUCT, OTHERWISE THE GUARANTEE OF THE PRODUCT WILL BECOME INVALID.