ASTEC Peterson 6710D, Руководство по безопасности оператора

Страница: 20 / 167

C
H A P T E R
1 M
A C H I N E
D
E S C R I P T I O N
1 8 6 7 1 0 D G
R I N D E R
O
P E R A T O R
S
A F E T Y
M
A N U A L
1 0 9 4 0 1 B
Important
When you are finished using the remote transmit-
ter, make sure that the green POWER ON light is
off. Otherwise, the transmitter batteries will be
dead next time you want to use it.
If you move the transmitter out of range while the
machine is running, or if the batteries become too
weak, the feed system, tracks, and discharge sys-
tem stop immediately. Then, after 90 seconds, the
engine slows to low idle. An error message is dis-
played and a loss of link is logged on the controller.
For further details, see “Loss of Link” on page 36.
Control Buttons
The transmitter controls are explained in Table 2.
The white pushbuttons each serve a dual function, as
indicated by the white and yellow labels.
The green pushbutton ( SHIFT function) changes opera-
tion between white-labeled functions and yellow-
labeled functions.
Table 2: Remote Transmitter Buttons
Icon Function
Power
Press the green button to turn ON
the remote.
The green LED is on during
operation.
Shift
Enables one function set—either
the yellow label set or the white
label set—while disabling the other
function set.
The red LED stays lit during
operation.
Low Battery
The red LED blinks when the
battery is low.
Compression
Roll Reverse
Reverses the direction of the
compression roll.
Roll Up
Raises the compression roll.
Roll Down
Lowers the compression roll.
Engine Speed
Fast
Increases the engine rpm.
Engine Speed
Slow
Decreases the engine rpm.
Feed Forward
Moves the feed forward.
Feed Stop
Stops movement of the feed.
Feed Reverse
Reverses direction of the feed.
Discharge On/
Speed Select
Turns on the discharge conveyor in
medium speed. Press again for
fast, press again for slow.
Table 2: Remote Transmitter Buttons (Continued)
Icon Function