ASTEC Peterson 6710D, Руководство по безопасности оператора, Страница: 19 / 167

C
H A P T E R
1 M
A C H I N E
D
E S C R I P T I O N
1 0 9 4 0 1 B 6 7 1 0 D G
R I N D E R
O
P E R A T O R
S
A F E T Y
M
A N U A L
1 7
Remote Transmitter
Many machine functions can be controlled using the
remote transmitter (Figure 8). It can be carried by hand
or in a separate vehicle, such as a loader, to remotely
control many machine functions.
The transmitter can be attached to metal surfaces due to
built-in magnets.
1
CAUTION
The red OFF & STOP button is not an emergency
stop switch.
The machine may not stop if the transmitter bat-
teries are discharged or if the transmitter is out
of range.
Do not rely on the OFF & STOP button to turn off
the machine.
Be prepared to turn off the machine at the con-
trol panel using the Engine switch or one of the
Emergency Stop push buttons located on the
machine.
For more information on the OFF & STOP button,
see “Remote Machine Stop” on page 36.
Figure 8: Remote Transmitter
Track
Track Enable Enables the drive tracks
without starting any
movement. (The tracks are
controlled from the remote.)
Fast Track Sets the drive tracks to high
speed mode. Press again to
switch back to slow mode.
Slide Gate
Slide Gate
Open Opens the slide gate under
the feed conveyor drive.
Slide Gate
Closed Closes the slide gate.
Lights
Work Lights Turns on the machine lights.
Operational any time the
battery disconnect switch is
turned on.
Data Ports
IQAN USB USB port to connect a
computer to the IQAN
system.
CAT / J1939 DATA LINK Engine ECM connection.
Table 1: Control Panel Controls (Continued)
Icon Description Function
F11177