6-3
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, User and Maintenance - cod. A-MAN03 - Rev. 02/2012
6.1.2
Display
In standard operating conditions the display shows the
manufacturer’s or dealer’s information, the data related to
water temperature inside the dispenser, dispensed litres,
filter days of use and gas (CO2) pressure in bar (optional)
are displayed pressing any dispensing key.
NB. The dispensed litres counter is updated after several
dispensing operations therefore the value displayed
must never be considered as absolute value, this is
true also for the days of use.
The display shows also the possible alarms signalled by
the Led 2 positioned above the
key, the message
includes also the alarm code and the partial description
of the alarm.
The alarms are displayed by pressing any dispensing key.
La visualizzazione degli allarmi avviene in occasione della
pressione di un qualsiasi tasto di erogazione.
6.2. Water temperature adjustment
1 The User Menu is accessed by pressing the rear Menu
Access Key
(see picture at side)
for at least 3 se-
conds – or until the beep is heard;
2 release the Rear Key, the
[REFRIGERATOR TEMP]
message
will be displayed followed by the value set;
3 by operating on the
or
keys it possible to
change the temperature among 4°- 6°- 8°C;
4 when the desired value is set, press the rear key 3
times until the
[sAVE sETTINGs]
message is displayed;
5 press simultaneously the keys
and
to save
the settings; the
[OK sAVED]
message is displayed
followed by a confirming beep. After few seconds the
display will automatically show the home screen.
CAUTION
All the alarm are followed by a dif-
ferent acoustic signal for each alarm
code (see DIAGNOsTICs chapter).
fig. 6.4
R e f r i g e r a t o r T e m p
+ 6 . 0
S a v e S e t t i n g s ?
O K S a v e d
S a v e S e t t i n g s ?
T . 0 1 ° C L t 0 0 0 0 0
g g 0 0 0 0
