3-1
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, User and Maintenance - cod. A-MAN03 - Rev. 02/2012
3.1 General notes
The dispenser was designed and manufactured in compliance
with the requirements of the Machinery Directive 2006/42/
EC, taking into account its ordinary use and the reasonably
intended use.
The dispenser was manufactured for the application
mentioned in the declaration of conformity enclosed to
this manual.
It is not allowed for any reason to use it for purposes
different that those for which it was designed, or to use
it with modalities different than those indicated in this
manual.
The different interventions must be carried out in accordance
with the criteria and the order described in this manual.
3.2 Symbols
Some operations are indicated in this manual by graphical
symbols that recall attention on the hazardousness of
the operations.
The symbols are positioned on the lateral column, as
shown in this page.
3.
Safety requirements
WARNING
Before carrying out any operation
on the machine it is necessary
to read the whole manual thoroughly,
paying special attention
to this chapter.
WARNING
This symbol indicates the possibility
that an event occurs that can
cause serious injury or considerable
damage to the machine, if suitable
precautionary countermeasures are
not adopted.
CAUTION
This symbol indicates the possibility
that an event occurs that
could cause minor injury or material
damage to the machine, if
suitable precautionary countermeasures
are not adopted.
