5-1
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, Use and Maintenance - cod. A-MAN03 - Rev. 02/2012
5.1
Environmental characteristics
The operating environment must have the following
characteristics:
• Temperature: + 5 ÷ + 32 °C (41 ÷ 89,6 °F)
• Maximum relative humidity: 80%
The dispenser must not be used in open areas and/or
exposed to atmospheric agents or in environments with
steam, fumes or corrosive and/or abrasive dusts, with risk
of fire or explosion, and however where the use flameproof
components is required.
5.2 Cleaning
Before starting up the dispenser it could be necessary to
clean the equipment from dust, foreign substances and dirt
accumulated during the transport and storage periods.
For cleaning use a sponge or a wet cloth with not aggressive
detergent and disinfectant products diluted in water. Do
not use solvents or alcohol-based products. The ventilation
slits of the dispenser, on the right side, must be cleaned
by using a dry brush.
5.3 Positioning
The dispenser must be placed on a surface which can
support its weight including water (gross weight, see
technical sheet) or on a proper optional stand in a vertical
position.
However, the water dispenser positioning must allow
sufficient ventilation, in particular, its back and upper
sides must have a minimum free space for ventilation of
at least 15 cm. For this reason, the dispenser must not
be placed near direct or indirect heat sources (ex. ovens,
radiators, stoves, coffee machines, etc.).
5.
Installation
CAUTION
If environmental conditions different
than those required are noticed
during installation, or if they change
over time, immediately contact the
Manufacturer beforeusing the dispenser
for the necessary checks.
CAUTION
Do not use liquids containing
solvents or abrasive materials
to clean the dispenser.
