Operator And Door Arm Installation Instructions - Push Side Applications
6
Figure 14
1. Refer to Figure 15, and, with the door arm coupling
screws facing up and the door arm against the
door rail, POSITION the larger end of the door arm
onto the operator output shaft.
2. With the door arm touching the face of the door,
TIGHTEN the door arm coupling screws evenly
(one quarter turn at a time) until fully tight.
The door arm coupling is a two-piece tapered coupling.
In order to draw the coupling halves together evenly
the three door arm coupling screws must be tightened
evenly (one quarter turn at a time) until fully tight.
CAUTION
3. HOLD the elbow of the door arm against the face
of the door, and THREAD the adjustable door arm
end link into the door arm as necessary to align
the end link mounting hole with the door arm pivot
mounting hole.
Installing the Door Arm
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
19 of 50
