Copyright © 2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Accessories and Door Controls Group, Inc. is prohibited.
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
4 of 50
Prerequisites
2
2. When using a plug-in 24VDC Class 2 transformer, a 110-VAC grounded power outlet is available in the vicinity
of the door.
3. A protective barrier (caution/warning tape) has been set up to prevent unauthorized access to work area.
5. The operator must only be installed on doors and frames in good working order, without sticking or binding
during normal operation.
4. If applicable, the existing door closer has been removed.
1. If the door is an aluminum storefront door, make sure that you do not drill into the tie rod or the top rail web.
Also, do not drill into the junction of the style and rail.
7. Attachment 1 has been reviewed for the following:
• Definitions of the terms used in this procedure
6. The door has been secured to prevent unexpected opening or closing during installation.
• A listing of the tools, equipment, materials, and consumables used in this procedure.
Precautions
3
1. Improper installation or adjustment may result in personal injury or property damage. The operator must be
completely installed and programmed or the door must be disabled prior to leaving the site. An incomplete
installation or unprogrammed operator can cause a safety hazard. Follow all instructions carefully. For
questions call ADAEZ Technical Support at the number listed on the front of this document.
2. For light duty or hollow core doors with insufficient top rail blocking, the included through bolts or sex nut and
bolts must be to securely attached to the operator mounting bracket.
3. This product is intended for interior use only.
5. The operator battery should be switched “OFF” until the operator and door arm installation are complete.
7. The installation must comply with all local, state, and national electrical codes. Also, transformer wiring must
be secured to prevent it from becoming entrapped in the moving parts of the operator or door.
6. An operating door creates pinch hazards. Be careful making operating adjustments while the door is moving.
4. Do not connect the door operator to source of power until instructed to do so. Applicable only if unit will be
wired to external power.
